The Extended Product Line Card is a list of other lines we have access to but do not stock in our warehouse.
Pool & Spa Brushes, Pads & Accessories
Manufacturing modular & custom fiberglass construction components which are alternatives to typical “formed and poured ” water features for the aquatics industry. Our A.S.A. MFG line of heavy duty fiberglass construction components are proudly built in the U.S.A.
Our products work together to save you time and money!
A-1 Metal Products is one of Southern California’s oldest and leading manufacturers of sheet metal products for the commercial and residential construction industry.
VENTS & SCREENS
FLASHING & EDGING
AIR PRODUCTS H.V.A.C.
AA Thread is a leading supplier in the water/wastewater and plumbing industries. We go out of our way to ensure that all of our products meet and sometimes even exceed all industry regulatory specifications and standards.
Thread Seal Tapes and Sealants
Polyethylene Encasements (Polywrap)
Polywrap / Pipe Installation Accessories
Pipe Wrapping and Electrical Tapes
Industrial Tapes and Supplies
Advanced Conservation Technology (ACT, Inc.) manufactures Hot Water Recirculation Systems that deliver hot water on demand, reduce water waste, and conserve energy. ACT, Inc.’s recirculating hot water pumps send cold water in the plumbing back to the hot water heater, via the cold water, or dedicated return line, while simultaneously bringing hot water to all fixtures on the line, in a matter of seconds.
Approximately 4,000 cases of accidental poisonings by Drain Cleaners are reported each year according to the American Association to Poison Control Centers Toxic Exposure Surveillance System.
The ADD-A-TRAP stops this problem before it starts. It installs under the kitchen or bathroom sink on the drain pipe where it can catch debris, hair and jewelry and help prevent clogs deep in your plumbing system.
Adjust-A-Brush ® products are proudly “Made In America.” Only the highest quality raw materials are used in manufacturing our products. The Adjust-A-Brush ® scrub pad and handles are designed for both the professional service individual or the DIY. The pads, because of their varying degrees of coarseness can be used on a wide array of materials, i.e. vinyl, fiberglass, tile, gunite, marcite, etc. From the spa to the above-ground pool, to the inground pool, to service vehicles, Adjust-A-Brush ® has a product to meet the need.
Advance Tabco has been a leading manufacturer of stainless steel warewashing equipment and shelving for the food service industry. With a focus on durability and versatility, Advance Tabco products are built to handle the daily demands of any food service establishment.
Advanced Modern Technologies Corporation (AMTC) is a leading designer and manufacturer of innovative, high quality washroom automation systems, accessories, and water saving devices.
Flush Valves for Commercial Toilets
Commercial Toilets and Systems
Urinals and Systems
Aero produces stainless steel food-service equipment.
Stainless Steel Kitchen Sinks
Stainless Steel Medical Instrument Tables
NSF Stainless Steel Sinks
Non-NSF Stainless Steel Sinks
Stainless Specialty Sinks
Stainless Steel Work / Prep Tables
Stainless Steel Work Tables
Stainless Steel Shelves & Pot Racks
Stainless Steel Dish Tables
Aeroflex USA’s EPDM insulation is engineered to be used extensively in conditioning systems for coolness loss reduction, condensation prevention, and energy efficiency. Our high-quality products are designed to outlast our competitors, proven by certifications from world’s leading standards such as ASTM, UL, FDA, CDPH and etc.
Afina Corporation is a manufacturer of fine Bath Cabinetry, Lighting, Decorative Mirrors and Accessories for the bath environment. We hope this web site allows you the ease of reviewing our products, specifications and list prices. We believe you will find many unique products.
When you consider lighting, be original, be bold, be environmentally smart. Choose AFX. Offering the perfect union of lighting beauty and smart design, our products have re-defined energy efficient lighting. Utilizing the latest LED technology, fluorescent lamping, state-of-the-art ballasts and top-notch design engineering,
Agaia, Inc. provides commercial and industrial cleaning solutions. It offers natural cleaning solutions for commercial laundries, factories and warehouses, food processing plants, shipping fleets, and oil and gas pipelines; and hotels and hospitality, aviation, janitorial and housekeeping, bottling and beverage packing, marine, bunker gear cleaning, manufacturing, boat and marine, trucking and transportation, and construction industries.
Our bathtubs and bathroom furniture enhance every room by giving the impression of understated luxury. Not pretentious, but subtle and cozy. Tailor-made for each room, free-standing or fitted – we will equip your rooms with our bathtubs and bathroom furniture. Various sizes and almost any type of wood leave nothing to be desired.
American Bath Factory has been manufacturing high-quality bath clawfoot bathtubs, shower kits and fixtures for over 35 years.
ADC’s laundry product designs are innovative and engineer-driven, improving efficiency and performance, extending product life and enhancing serviceability.
Coin Operated Dryers & Washers
Efficient and reliable on-premise laundry facilities
Specialty Equipment – ADC’s EcoDry Firefighter’s Gear Dryer Cabinets are energy efficient and are designed to prolong the life of the gear.
Along with toilet compartments, we also produce complete lines of shower cabinets. American Sanitary’s partitions provide the comfort and convenience that are important with today’s fast-paced lifestyle. With our many years of experience in the toilet partition industry, our products offer more advantages and beauty than any other materials used to date. Our design is developed from our metal partition line, incorporating all of the features required to produce a sound, rigid and lasting installation. The partitions are available in a wide variety of appealing colors and patterns, and will delight the architect and decorator with their beauty and durability.
For more than 140 years, American Standard has led the way in developing innovative bath and kitchen products that have set and re-set the standards for living healthy, living responsibly and living beautifully.
All American Tubs walk-in tubs are constructed with a heavy-duty fiberglass shell reinforced with a stainless steel frame. Our walk-in baths are coated with an easy to clean, high-gloss finish and anti-slip, textured floor. Our tub design includes a built-in safety grab bar, placed next to the ergonomically designed door. The lightweight yet heavy-duty reinforced door system is built with a silicone rubber seal and an easy-release handle for ease of use.
American Water Heaters is a leading manufacturer of high-quality water heater products with manufacturing, research and development and corporate offices located in Johnson City, TN. American offers a comprehensive line of residential and commercial water heaters.
For over 30 years we’ve been leading our industry with the most reliable walk-ins for the everyday foodservice and retail business because of our quality construction, the most efficient insulation, the highest quality energy efficient refrigeration system, expedited customer service and the longest running warranties in the industry.
AmeriSink, Inc. is a leading stainless steel sink manufacturer with over 30 years in the business. We offer a comprehensive line of AmeriSink products for the kitchen and bath that will fit every style and project imaginable. Our product line includes 16 and 18 gauge cUPC certified stainless steel sinks, ADA compliant stainless steel sinks, apron-front sinks, granite composite sinks, glass and porcelain sinks.
Ampco Pumps Company has been providing quality centrifugal pumps and positive displacement pumps to the sanitary, marine and industrial markets worldwide for nearly 70 years.
Sanitary Positive Displacement Pumps
Sanitary Centrifugal Pumps
Mixers & Blenders
Brewing & Cellar
Anaheim Manufacturing Co. designs and manufactures food waste disposers. The company offers its products through brands such as Waste King, Whirlaway, Sinkmaster, and Quick&Hot, as well as private brand labels including KitchenEater, Barracuda, Dayton, and Plumber Friendly.
Anchor Fluid Power, an ISO 9001, AS9100D and OHSAS 18001 registered company, offers high quality products that provide solutions for your hydraulic connection requirements. We are dedicated to continuous improvement in all aspects of our company.
Our Product line includes:
High Pressure Hydraulic Ball Valves
WOG Stainless Steel Ball Valves
In-line Needle, Check, and Flow Control Valves in Carbon Steel
Split Flange Adapters
Split & Captive Flanges
SAE 4-Bolt Welded Port Flanges
SAE 4-Bolt Threaded Port Flanges
Square 4-Bolt Welded Port Flanges
Square 4-Bolt Threaded Port Flanges
A. O. Smith’s selection of residential and commercial water heaters, boilers, and storage tanks is unmatched for quality and diversity. Anywhere hot water is needed, A. O. Smith can provide an energy-efficient solution with maximum value during and for years after installation.
Aqua-Rex is an advanced electronic Physical Water Conditioner that has been used for the treatment of hard water in the UK and the rest of the world since 1993. It is widely used in homes, schools, offices, factories and hotels with many hundreds of thousands installed and successfully working. Aqua-Rex is the only Physical Water Conditioner with US independent third party performance certification.
AquaMotion’s innovative design created a pump line with the lowest power consumption. This is based on actual amp draw comparisons with published Underwriters Laboratories data of comparable PSC motor or ECM pumps on the market. The PSC design features the only field replaceable and field flushable Green ECO-CARTRIDGE™. This cartridge is the heart of every circulator and contains all moving parts. The design allows for replacement of the cartridge or by pulling it apart and flushing it and reinstalling it. This is a tremendous advantage in areas of hard water. The design prevents black iron oxide and contaminants from entering into the cartridge. The flushable cartridge extends the life of the pumps and makes them a sustainable product that can double its operating life.
Artis Metals Company has been manufacturing high quality thick metal HVAC venting products since 1937.
Wall Vent Caps for Exhaust or Intake
Roof Caps (J-vent), Roof Mount with Damper & Peak Vent (slant back)
Heavy Duty Turbine Vents, Globe Vents, Aero Foil & Master Vents
Chimney Caps:Wind Directional Caps, Insulated Pipe Adapters, Rain Caps (Cone), Vacuum Caps, Tile Chimney Adapters, Gas Vents
Backdraft Dampers: Butterfly Dampers, Offset Pin Damper, Dryer Damper
Foundation and Soffit vents
Plastic Roof Vent Caps
Roof Bases:Flat, Pitched, Saddle and Adjustable Roof Bases
Here at Ashland Pump, each product we make goes through extensive testing. For over 25 years we’ve not only delivered pumps that sell, we’ve delivered the promise of getting your order made correctly. We understand you’re running a business of your own. That means you need financial security in your inventory. Ashland Pump stands behind our products and our CSA/CUS approved facility. Ashland Pump products use vortex impellers to reduce pump clogging and are made with thermoplastic, brass, and cast iron variations to fit any job.
Products (Commercial. Industrial. Residential. Municipal.)
Battery Backup Sump Pump
Thermoplastic Sump Pumps
Cast Iron Sump Pumps
Solids Handling Pumps
Established in 1987, Ashley Norton has grown to become one of the leading designers and manufacturers of architectural hardware. We have developed a wide range of products including a collection of designs, finishes and styles that suit even the most discerning customer.
The best boilers in America are built in Pennsylvania by Axeman-Anderson. All of our boilers are hand welded to ensure quality and reliability.
Our first productThe Hugger™ is the way to cope with unwieldy hoses, electric power cords, cables and ropes. Made of durable polypropylene and wide hook and loop closures, the Hugger can handle it. We have now developed many other related items. Such as: Hose hooks, straps, saddles and shelf hooks.
We custom design and manufacture Stainless Steel products to meet our clients requirements.
– 304 or 316 Stainless Steel fabricated pre-sloped trench drains. Can be made in 4in thru 12 inch widths and with Grates ranging from light duty to extra heavy duty. Ideal for shower rooms, Kitchens, and custom applications.
– Custom Fabricated specialized water control boxes for either exterior or interior applications
We are America’s leader in retrofitting any commercial “Vitreous China” wall mounted toilet with a support. Our toilet support enables an obese person weighing up to 1000 lbs to use the supported toilet without fear of it coming off the wall and causing injury or embarrassment. This allows Healthcare and Commercial facilities to have peace of mind about possible law suits.
Bathcraft Inc. manufactures and markets showers and tubs to selective homeowners, contractors, and interior designers. The company offers garden tubs, assisted living models, tile units, multi-piece models, acrylic showers and tubs/showers, acrylic tubs and whirlpools, reliance bases and showers, and gelcoat bases.
Beacon-Morris is the originator and the world’s leading producer of kickspace heaters. The Twin-Flo kickspace heater line leads Beacon-Morris’ fine family of residential and commercial heating products. Designed for distribution by plumbing and heating wholesalers, Beacon-Morris products provide solutions for all heating applications.
Bear Creek Glass strives to continually bring you the most inspiring and beautiful hand made glass sinks, chandeliers, lighting, and other glass products. Our mission is to improve the quality of life of everyone that comes in contact with our products.
Belwith Products has led the decorative hardware industry in design, craftsmanship, and innovation since 1893. Beginning with the Keeler Brass Company, and spanning over 125 years, our reputation has been forged by bringing the very best decorative and functional hardware products to your home.
Bertch has been reviving the cherished art of traditional cabinetmaking since 1977. All products reflect a commitment to reforestation, recycling and a general respect for the environment. Utilizing only the finest wood, furniture joints and exceptional finishes to create distinct products for the home.
Besa Lighting has offered sophisticated lighting designs intended to complement virtually all types of architecture. Our product offering includes a wide assortment of styles, which are designed with a commitment to fulfill the demanding needs of both residential and commercial applications.
Bestbath showers are manufactured to exact specifications to provide safety and to ensure that the water drains properly. We are pleased to offer custom designed bathing solutions and engineering support to assist you in creating bathroom units that meet your unique requirements for space, configurations, compliance, and user.
ASSE-1060 Approved Backflow Enclosures, Since 1999
Established in 1984, Big Foot Manufacturing has served the water well drilling and irrigation needs of companies throughout the country east of the Mississippi with world class products. From PVC screens and filters to shale traps and risers, we have focused on your needs with innovative ideas and top quality products.
Bison Coolers is a family-owned company. Our family works hard together so you and your family can play hard together. If you’re searching for the best heavy duty marine coolers and camping coolers at the lowest prices, then these professional grade coolers are a perfect — and they’re hundreds of dollars less than comparable ice chests!
With our unparalleled quality, breath of design possibilities and precision craftsmanship, BLANCO has proven that the stainless steel sink is more than just a functional element in the kitchen. BLANCO has been producing high quality kitchen technology since 1925. Today, BLANCO stainless steel sinks, SILGRANIT sinks , faucets , and kitchen accessories represent quality, functionality, aesthetics and professionalism of the very highest in over 100 countries all over the world.
Established in 2009, Blu Bathworks is a Canadian modern bathware design-house + manufacturer based in beautiful Burnaby, British Columbia. Blu offers the complete modern bathware solution, fully certified for the North American market, with a catalogue including freestanding bathtubs, sinks, shower bases, tapware, shower systems, toilets & bidets, furniture + accessories – all designed to work in harmony or as standalone pieces.
Since 2003, Blue Air has provided high quality Commercial Refrigeration to the food-service industry.
Commercial Refrigeration = Reach-ins, Merchandisers, Under-counters, Prep Tables, Chef Bases, Bar Equipment
Ice Machines = Water filter, Under-counter, Modular, Storage Bin
Supplying vacuum pumps and compressors for use with air, gas and liquids, not only does Blue Diamond Pumps offer off the shelf units, but also adaptations of standard OEM products. Blue Diamond Pumps is passionate about meeting customers’ needs and always welcomes the opportunity to discuss new applications.